Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Dungeon of Despair [ScottDA dungeon 01]

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Guild Journeyer ScottDA's Avatar
    Join Date
    May 2017
    Location
    Lockport, NY
    Posts
    121

    Wip Dungeon of Despair [ScottDA dungeon 01]

    A little something I've been toying with.... Hope it meets all the criteria.

    ### Latest WIP ###

    Dungeon of Despair.JPG

  2. #2

    Default

    Oh that's... ummm.... I was going to say beautiful, but its REALLY gory! LOL!

    The only thing I can see that's a bit jarring is the stone wall fill is a bit pixelated. You might want to reduce the scale on it just a bit?

    Red will replace most of that earth coloured fill with plain black - unless you swap it out for black yourself?

  3. #3
    Guild Journeyer ScottDA's Avatar
    Join Date
    May 2017
    Location
    Lockport, NY
    Posts
    121

    Default

    Yes, I did notice the pixelated walls after I'd saved the image as a JPG. I've fixed the pixely wall stones and changed the dirt brown to black. Still needs some tinkering. If being gory is against CG rules I can tone it down.... I just figured every dungeon needs a torture chamber.

  4. #4

    Default

    No rules against gory

    There would have been something wrong with me if I called it 'beautiful', though

    'impressive' would have been better

  5. #5
    Guild Journeyer ScottDA's Avatar
    Join Date
    May 2017
    Location
    Lockport, NY
    Posts
    121

    Default

    Well, it could be beautiful for the colors and not the subject matter.... Actually, I may take out the splotches of blood, anyway, as I'm noticing they look pale and more like wads of gum against that red stone floor....

    ### Latest WIP ###
    Dungeon of Despair.JPG

  6. #6

    Default

    LOL! I'm sorry. I shouldn't laugh - and it isn't at you. I thought they were patches of skin, and you had mapped the lair of Hannibal Lecter! (I'm such a goon!)

    Looks really smart, and a lot better for the smaller scale of the stonework fill

  7. #7
    Guild Journeyer ScottDA's Avatar
    Join Date
    May 2017
    Location
    Lockport, NY
    Posts
    121

    Default

    Actually, that's not far off, as I had the Hellraiser films in mind when I was doing it! Pinhead, Hannibal Lecter... whichever!

    Anyway, I cleaned it up some, organized things better, and gave it more of an actual direction. I think its much better now, and unless someone spots something, I think I'm done with my little round dungeon of depspair.

    ### Latest WIP ###
    Dungeon of Despair.JPG

  8. #8
    Administrator Redrobes's Avatar
    Join Date
    Dec 2007
    Location
    England
    Posts
    7,245
    Blog Entries
    8

    Default

    Brilliant work. Pop a note to this on the sticky of finished maps if you decide not to make any more changes to it then.

    Theres a couple of odd pale triangles on the stone ring left and right. It looks like a thing thats known as Z fighting. Cant be sure what app this is made on but it looks as tho you have two textures on two layers that are both set to the same Z order. So something that a 3D app like blender might run into. Otherwise it looks fine to me. I esp like some of the icons. I wish I had that rack when I was doing my dungeon lair the other week.
    Last edited by Redrobes; 11-19-2017 at 06:43 PM.

  9. #9

    Default

    Its CC3, and that Z fighting is sometimes caused by the bevel effect, particularly around sharp corners. Its a tricky one to compensate for, but it usually behaves itself if you reduce the bevel so that its only just there. Some textures are better than others, but it would be a shame to change the texture since it works so well with the rest of the map.

    You could try reducing the percentage of the bevel, Scott?

    Other than that use the other bevel - whichever is the other bevel to the one you are currently using.

  10. #10
    Guild Journeyer ScottDA's Avatar
    Join Date
    May 2017
    Location
    Lockport, NY
    Posts
    121

    Default

    Ah! I did not see those. Yes, I'm sure its the bevel. Well, as that's on the outside wall I could get rid of the bevel altogether, probably. Let me play with it some and see what I can do. I'll reduce the bevel and if that doesn't work I'll get rid of it.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •