Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: June 2012 Entry: Sunrise Over Boreas

  1. #11

    Default

    Quote Originally Posted by Hai-Etlik View Post
    It's a very nice picture, but where's the map? It doesn't really convey any sort of information about spatial relationships or topology. There are no readily visible features on the planet.
    True enough. I had originally set out to do a map similar to the ones LonewanderD and Vorropohaiah are working on, but as I began working on this and experimenting around with adding additional information to the map, I ended up thinking that in terms of composition, it just looked better as a simple planet piece. However, perhaps you are right Hai-Etlik, technically it isn't a map. Maybe I'll play around with it a bit more and see if I can come up with a more cartographic rendering of this piece.

    Cheers,
    -Arsheesh

  2. #12

    Default

    Looks really great! I'm looking forward to seeing a more "mappy" version.^^

  3. #13

    Help

    Well, after Hai-Etik's suggestive comments I went ahead and re-vamped this piece into something a bit more "map-like". However, I've hit a snag. You see I'm attempting to add graticule tick marks and numbers indicating the degree of latitude which will need to be curved along the interior of the... well I'm not quite sure what its called, but "sickle" shaped object. There are a couple of problems that I have here:

    My Problems:

    1. How can I, with minimal time expenditure, create a set of graticule tick marks that extend the full 180 degrees of the globe?
    2. Once I have created these tick marks (and degrees of latitude), how can I place them along the curve of the sickle shape?

    First off, I am working with GIMP and Inkscape, but am open to checking out other free programs if anyone knows of any that might help. With that said, does anyone know how to accomplish these two tasks given what I'm working with (or with the help of supplemental free programs)? In order to give you a better idea of what I'm asking, I'll elaborate on these two questions.

    As to the first question, I know that I will need to create a set of graticule tick marks that extend the full length of the sickle (which is about 3,646px long). I would like to place all 180 tick marks. What I don't know how to do is how to create them in manner that is either accurate or relatively quick (I don't want to end up having to painstakingly create and position each graticule tick manually).

    As to the second question, I may have discovered a way to do this in Inkscape: by creating a curved path along the sickle and then placing the graticule ticks etc along it. However, this assumes that the graticule ticks etc are already on a path (I don't know how to import a bitmap and then place it along a path). So this would limit me to creating the graticule ticks in Inkscape (which I'm open to if anyone knows how). Aside from that option, I really don't know how to accomplish this.

    I hope someone out there who is more knowledgeable about these matters wouldn't mind offering me an assist, I could sure use it.

    Cheers,
    -Arsheesh

    ### LATEST WIP ###
    Attached Images Attached Images
    Last edited by arsheesh; 06-26-2012 at 01:29 AM.

  4. #14
    Guild Artisan LonewandererD's Avatar
    Join Date
    Jun 2009
    Location
    Australia, AUSSIE AUSSIE AUSSIE!
    Posts
    814

    Default

    Aaaaaaaaaaaaand there goes my shot of winning this month's comp

    -D-
    People come and people go. I walk amongst them, I see their faces; but none see mine. I pass them in the streets but nary a glance is spared my way, for what interest would they have in a Wanderer? Not of this world... Forever Alone... Forever Wandering... LoneWandererD...

    My DeviantART

    Finished Maps

    RIP Angel "Ingy" Yates - The first inspiration that guided me towards art. You will be missed...

  5. #15
    Professional Artist Guild Donor Sapiento's Avatar
    Join Date
    Jul 2009
    Location
    Salzburg, Austria
    Posts
    3,655

    Default

    That looks great!

    typo: oribital period
    Last edited by Sapiento; 06-26-2012 at 03:55 AM.

  6. #16
    Community Leader Lukc's Avatar
    Join Date
    Sep 2011
    Location
    Seoul, South Korea
    Posts
    1,573

    Default

    A fantastic entry, no two ways about it!

  7. #17
    Software Dev/Rep Hai-Etlik's Avatar
    Join Date
    May 2009
    Location
    48° 28′ N 123° 8′ W
    Posts
    1,333
    Blog Entries
    1

    Default

    On a desk globe, the physical bracket is called a meridian, which is of course a bit confusing as the latitude lines printed on the globe are also called that. Still it's probably the best name available for that graphical element.

    In Inkscape try this: Draw a mark, switch to rotation mode, drag the rotation centre of the mark to the centre of the globe, then bring up the Transform dialog so you can rotate by precise steps. Rotate, duplicate, and repeat until you fill the meridian.

  8. #18
    Guild Expert Facebook Connected vorropohaiah's Avatar
    Join Date
    Feb 2010
    Location
    Malta
    Posts
    1,425

    Default

    oooh... gorgeous colours on the 'graticule' much nicer than my sick green

  9. #19

    Default

    Quote Originally Posted by vorropohaiah View Post
    oooh... gorgeous colours on the 'graticule' much nicer than my sick green
    I don't think the green is sick at all, on the contrary its the natural choice for a sci-fi LCD. I probably would have gone with green as well, except that since the theme of this piece is "ice", I tried to keep the color pallet pretty cool, and a more "heather" colored LCD seemed more appropriate.

    Quote Originally Posted by Hai-Etlik View Post
    On a desk globe, the physical bracket is called a meridian, which is of course a bit confusing as the latitude lines printed on the globe are also called that. Still it's probably the best name available for that graphical element.

    In Inkscape try this: Draw a mark, switch to rotation mode, drag the rotation centre of the mark to the centre of the globe, then bring up the Transform dialog so you can rotate by precise steps. Rotate, duplicate, and repeat until you fill the meridian.
    Thanks for the tip Hai. I tried doing the draw-center-transform-copy-and-repeat method you suggested, and even made it half way through the process. However, when I panned out I noticed that the ticks seemed crammed together on one end of the meridian, and pretty widely spaced apart on the other end. I was baffled since I had thought that I had calculated the exact distance that each of them needed to be apart from each other. Then I realized that I had only made the calculations based upon one set of axis. Since my higher level math is a bit rusty, I may have to go back to the original plan of creating the meridian (on a single set of axis) and then trying to set it along the curved path of the meridian. We'll see if this works or not.

    Quote Originally Posted by Lukc View Post
    A fantastic entry, no two ways about it!
    Thanks Luke!

    Quote Originally Posted by LonewandererD View Post
    Aaaaaaaaaaaaand there goes my shot of winning this month's comp

    -D-
    Well I certainly wouldn't go that far, I think your piece is very much still in the running. But thanks, I am rather happy with the way this turned out.

    Quote Originally Posted by Sapiento View Post
    That looks great!

    typo: oribital period
    Thanks Sap!

    Cheers,
    -Arsheesh

  10. #20

    Default Finished

    And I think I'm calling this done.

    The most tricky part of the whole map was creating and aligning those graticule ticks. In case anyone else ever tries this, the method I eventually used was to use the Measure Tool in GIMP to determine both the degree, and Horizontal and Vertical axis of the pixels, then, on a separate layer, paint a tiny reference dot there. I created a reference dot for each 10 degrees. Then, between the 90 degree - 80 degree section of the south east portion of the meridian, I used the same method to create reference points for each degree (i.e. 89, 88, 87 ect). Then I imported this into Inkscape and used the draw-center-transform-copy-and-repeat method Hai-Etik suggested to get first 10 degrees placed in the south-east section of the meridian (i.e. 90-80). Then I copied this entire section, pasted it in the next section and transformed it, and repeated this process. Once I was done, I imported the bitmap of this back into GIMP and aligned it to the Meridian. Phew, glad that's over!

    Anyway, thanks for the help and constructive comments everyone.

    Cheers,
    -Arsheesh

    ### LATEST WIP ###
    Attached Images Attached Images
    Last edited by arsheesh; 06-26-2012 at 11:36 PM.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •