Sci-Fi themed Geormorphs

[RocketDad]

Geomorph%u00252BDetention%u00252Bwith%u00252BKey.jpg

1. Security Alcove: This air-lock style corridor is lined with cameras, sensors, and weapons detectors. Any unauthorized personnel are locked inside while reinforcements get into position. If needed, the alcove can be gassed.

2. Security Monitor: This position is always manned and a roving guard keeps look out on the three corridors that open into this area. The two security consoles are the only way to open the cells beyond.

3. Guard Room: There is a refreshment alcove, lounge table, and computer console in this area. there are always at least two guards in the area, and the door is transparent to allow an unobstructed view.

4. Detention Cells: 24 individual cells are divided into three halls, each of which is a half level below the main deck. The upper areas are filled with surveillance equipment, gas jets, noise machines, and other instruments of torture and control.

5. Crawlspaces: There are a pair of utility crawlspaces in this area that service the plumbing needs of the cells, and leads to a centralized garbage disposal.

[RocketDad]

Geomorph%u00252BEngineering%u00252Bwith%u00252BKey.jpg

1. Lift: Up to six Engineers with radiation armor can fit in the lift at once, or a four-crew Damage Control Party with all their equipment.

2. Monitor room: All this open-air room overlooks the drop into the maintenance shaft of the main reactor. The consoles have interface ports for robots to log-in and monitor the system at all times.

3. "Circuit Breakers" is the common slang for the main electrical routing systems located here. They are also open to the maintenance shaft.

4: Retractable Walkways: These walkways connect the peripheral stations to the central capacitors and regulator towers. They do not have rails, but are equipped with magnetic surfaces for safety.

5. Capacitor: One of two in the Substation. The open shaft is in micro-gravity at all times, while the narrow walkways have full gravity for convenience.

6. Regulator Tower: This is the main discharge port for overloads from he reactor, and there is an almost constant beam of power from eh top of the tower into static discharge ports. Many functions of the reactor itself can be influenced by adjusting the settings of the Regulator Tower.