Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: [Award Winner] Photoshop: Using the Clone Stamp tool for better Brush work

  1. #1

    Post [Award Winner] Photoshop: Using the Clone Stamp tool for better Brush work

    As anyone who has made brushes in Photoshop has doubtless learned, you cannot make a two-toned brush. That is, if you make a tree brush and try to overlap two strokes with it, the tree beneath will show through the one on top. The reason for this is that Photoshop's brushes are a greyscale image where black pixels are completely opaque, white pixels are transparent, and grey pixels are translucent. This allows you to paint with the brush in any color you want, but it prevents you from using it to make nice isometric mountains and forests:

    1.png

    Obviously, that brush is just a hack job I made for the purposes of this tut, so don't complain about its lack of quality. Anyway, when you use a brush in the way Photoshop intends, you get results like those on the left. I intend to show you how to make the same brush give you what appears on the right.

    The first thing to do is to create or load your brushes. If you're only going to use them for a single map, it isn't really necessary to save the image as a brush, but it is handy if you want to do more than one map in a certain style. I won't cover that, since there are loads of brush-making tuts out there already.

    The next thing is to create a palette area in your document from which you can sample the brushes. You can do this in a separate document, but it's easier if you do it in the same doc you're working in. Go to Image > Canvas Size... (Alt + Ctrl + C). Set your Anchor Point to one of the sides of your existing canvas. This will cause the new area to appear on the opposite side of the one you clicked.
    2.png

    You want to expand the width (or height, if you set your Anchor Point on the top or bottom) enough to hold the brushes you plan to use.

    Now you should have a transparent section to one side of your canvas. Make a new layer to hold your palette, and drop a single stroke of your bush in that area, like so:
    3.png

    You'll notice that the tranparency checkerboard grid is showing through the mountain. If you move the layer over your existing map, you'll see the map's colors and lines showing through it. This tells you that if you just layer the brush over itself, the copies underneath will show through. So the next step is to paint white behind the brush as a mask. Make a new layer and put it beneath the palette layer, then just paint in white where you want the brush to act as a mask.

    Here I've moved my sample over onto the map to illustrate how the background no longer shows through:
    4.png

    Now, grab the Clone Stamp Tool (S), make sure that the "Sample" box shows "All layers," and the "Aligned" box is unchecked.
    5.png

    "Current layer" only takes the sampled pixels from the layer you're currently working on, which would force you to constantly change back to your palette layer to pick a new brush. "Current and below" samples from the layer you are working on and all the layers beneath it, which will work if you place your palette beneath your working layers.

    "Aligned" causes the sample point to remain in the same place relative to the cursor after your first click, which is handy for making textures but not useful for what we're doing. Turning it off ensures that your sample point stays put.
    Last edited by Midgardsormr; 12-08-2009 at 11:52 AM.
    Bryan Ray, visual effects artist
    http://www.bryanray.name

  2. #2

    Post

    Change the size of the clone stamp so that it contains only your mountain ( [ and ] ) and make sure the Hardness is set to 100% (right-click and move the Hardness slider).

    Alt-click in the center of your mountain. Since you're set to sample all layers, you'll get the black and grey of your normal brush, the white underlayer, and transparency around it.

    Create a new layer to hold your mountains and change its blend mode to multiply. This will allow the background to show through, but the white will still mask out the mountains beneath!
    6.png

    For best results, you'll want to make several different variations of your mountains, but since they're all stored in that palette area to the side of your document, when you want to change to a different mountain, all you need to do is to alt-click the mountain you want to use, then stamp away.

    The clone stamp can also be used to take bits from one image and stamp them into another, so if you want to keep all of your isometric mountains and trees in a single document that you use for every map you make, you can just keep that image open to one side and sample from it instead, saving you the time of prepping the palette inside your working doc.

    edit: Remember to work from top to bottom when using isometric stamps. This will ensure that they layer properly.
    Last edited by Midgardsormr; 10-03-2009 at 01:01 PM.
    Bryan Ray, visual effects artist
    http://www.bryanray.name

  3. #3
    Community Leader Facebook Connected Ascension's Avatar
    Join Date
    Jun 2008
    Location
    St. Charles, Missouri, United States
    Posts
    8,392

    Post

    Ever since you mentioned Clone stamp I've been trying to get it to work right with no success. I'm very glad that you made this tut to explain it all. Nice job.
    If the radiance of a thousand suns was to burst at once into the sky, that would be like the splendor of the Mighty One...I am become Death, the Shatterer of worlds.
    -J. Robert Oppenheimer (father of the atom bomb) alluding to The Bhagavad Gita (Chapter 11, Verse 32)


    My Maps ~ My Brushes ~ My Tutorials ~ My Challenge Maps

  4. #4
    Guild Journeyer Facebook Connected Locution's Avatar
    Join Date
    Nov 2009
    Location
    Canada
    Posts
    171

    Default

    Thank you so much for this! This was much needed information!

  5. #5
    Guild Journeyer altasilvapuer's Avatar
    Join Date
    Mar 2009
    Location
    Augusta, GA
    Posts
    194

    Default

    You know, I never thought to try something like that. Great idea, Midgardsomr! Duly repped.

    -asp
    My current worldbuilding experiment(s):
    Geidor
    --------------------------------------------

    But I, being poor, have only my dreams;
    I have spread my dreams under your feet;
    Tread softly because you tread on my dreams.
    -W.B. Yeats

  6. #6

    Post

    I'm glad it helped!
    Bryan Ray, visual effects artist
    http://www.bryanray.name

  7. #7
    Guild Artisan Juggernaut1981's Avatar
    Join Date
    Sep 2009
    Location
    Sydney Australia
    Posts
    677

    Default

    Midgard> I have so been planning to do that in the end. Sit down and create a really nice big pallette of "standard icons" for a style and then use them mercilessly. Thankyou for confirming this and I'll try work on a GIMP Version for the rest of us...
    "Sacrificing minions... is there any problem it cannot solve?" - Order of the Stick


    Some of the books I have written, or am still writing...
    My Lulu Store

  8. #8
    Professional Artist Facebook Connected Coyotemax's Avatar
    Join Date
    Jul 2009
    Location
    Canada
    Posts
    1,945

    Default

    Ok so i'm playing around with this idea, and I'm running into an issue. the way the clone stamp works is that when you alt-click to define the source point, any brush strokes/stampings are relative to that position, and moves as you move. So from what i'm discovering, you need to redefine the source point after every single time you make a placement.

    I'm finding this method to be just as much work as doing them all manually in the first place, especially when trying to place in multiple items.

    is there something I'm missing?

    My finished maps
    "...sometimes the most efficient way to make something look drawn by hand is to simply draw it by hand..."

  9. #9
    Professional Artist Guild Donor Sapiento's Avatar
    Join Date
    Jul 2009
    Location
    Salzburg, Austria
    Posts
    3,656

    Default

    That's what I asked myself, too.

  10. #10

    Post

    Uncheck "Aligned."

    That's one problem with settings that stick--when you're writing a tutorial, you sometimes forget what the defaults are.

    Adding that step to the tut...
    Bryan Ray, visual effects artist
    http://www.bryanray.name

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •