Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Very first map attempt!

  1. #1
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Wip Very first map attempt!

    I decided I'd post pictures as I experiment and move further along here. So far I've finished just the base of the map (landmass & major bodies of water). Put in some border and coastal wave details - but still have yet to do any terrain, landmarks, cities, rivers, roadways, etc. This will be the surface version of the map - there will also be an underworld version of it after I finish this one. Hope you enjoy. Any tips, tricks, advice or even general comments would be greatly appreciated! Thanks!

    CotFS World Map v1.jpg

    That's how far I made it in my first night (about 6 hours worth of work). It's tedious, but it's coming along. Trying to find the right brush sets for terrain that will match the style (likely be making most of them from scratch).

  2. #2
    Guild Grand Master Azélor's Avatar
    Join Date
    Jul 2008
    Location
    Québec
    Posts
    3,363

    Default

    The background look nice, what technique did you used ?

    I think you used cloud by difference to make the water. The high contrast and difference in color make it look a bit strange.

    It is in Europe and written in Hebrew, is it an alternative map or an historic one ?
    Last edited by Azélor; 08-23-2013 at 12:13 PM.

  3. #3
    Guild Journeyer
    Join Date
    Mar 2009
    Location
    New Hampshire, USA
    Posts
    169

    Default

    I see Spain, the Black Sea and the Brest area of France, maybe even the English Channel. If I can recognize this, I guess you are doing a good job!

  4. #4
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Default

    @Azelor: You are correct on your guesses. Since the ocean is supposed to be a very dangerous and dark place, I want it to have that strange/eerie feel. The large mideastern lake is not supposed to have that feel - and I plan on masking it off and using a couple different effects to make it feel more friendly, but at the same time still match the other water for the most part. For the parchment paper I used clouds, difference clouds, emboss, hue/sat mask. Im going to apply probably two Levels masks - one with some mask brushwork to give the edges a slightly different feel to the center. Then Ill just tweek the heck out of my two levels settings to get the look I want. I'll post an update when I get that part done.

    @Galendae: Awesome! That's exactly what I'm going for. This fictional world is set in the time before the global floods described in Genesis, the epic of Gilgamesh, and other mythical global floods. The Mediterranean is essentially going to serve as the cradle of civilization as a giant fertile valley with lush plains forests and jungle inside it. There will also be a pair of river that flow down through it I have yet to draw in. I've got yo study the topographical of the Med. a bit more to get the placement right. The good thing is that a global flood would drastically change the terrain, so I don't have to kill myself trying to get it perfectly accurate - though that is my goal.

    Its alternative I suppose though with the intent of having a mythical history of actual earth - at least from an allegorical standpoint.
    Last edited by Veluux; 08-23-2013 at 04:37 PM.

  5. #5
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Wip [WIP] Nah'Veyl Pre-Flood World: Updates!

    Here is an update of the map from what I was able to add today. Basically I just tweaked a few things that were already in place. Added a world compass. Also added a planning layer that's got red dots for mountain peaks, teal lines for small rivers, and blue lines for massive rivers. The red lines are cliff faces and the orange lines are just temporary boundary lines to help me keep track of where the Mediterranean Sea used to border.

    CotFS World Map v1.1.jpg

    Probably tomorrow I'll start up my actual terrain layer (may actually consist of several layers, separated by regions). Once the mountains and major terrain fixtures are set, then I'll start cutting in the water systems.
    Last edited by Veluux; 08-23-2013 at 10:22 PM.

  6. #6
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Wip [WIP] Nah'Veyl Pre-Flood World: Updates!

    Here is another update without the planning layer visible. All I have is a greyscale overlay of the Mediterranean I lined up to give viewers a better scope of the alignment for the Soaring Sea (black sea) and Barren Sea (gulf between Egypt/Saudi Arabia).

    CotFS World Map v1.11.jpg

    I added some noisy glow to the world title, as well as added in names for the other bodies of water. Its very slowly coming together. Can't wait to start on terrain - which I think will be the hardest part for me. Don't have much experience with painting in terrain. Wish me luck!
    Last edited by Veluux; 08-23-2013 at 10:24 PM.

  7. #7
    Guild Grand Master Azélor's Avatar
    Join Date
    Jul 2008
    Location
    Québec
    Posts
    3,363

    Default

    river problem !

    the Danube and Oder rivers cannot meet. Rivers ussualy meet when they flow downhill otherwise it's an island and it's better not to sepperate them with rivers. It's the same with the area north of Crimea.

    The Nay'Yeul label don't fit the rest of the map. Maybe it's just the blue effect.

  8. #8
    Guild Member AlexSchacher's Avatar
    Join Date
    Jun 2013
    Location
    United States
    Posts
    72

    Default

    Ive got to agree with Azelor. You seem to have a few river problems. The only river I can figure out which way its going, is the one that flows southwest out of the Soaring Sea. Seas/Lakes will only have one river which water flows out of the lake, the rest of the rivers will be feeding water into the sea/lake from higher ground. By this logic, I would assume that the north western river is flowing into the Soaring Sea, and out of the body of water at the top of the map. This isn't likely, as the body of water at the north side is very close to the ocean, and would likely have a short river path leading to the ocean (unless that body of water is part of the ocean, in which case there would be no outflowing rivers).

    As for the southeastern river, judging by your small streams, it seems like it is outflowing from the Soaring Sea, which again there is only going to be one river flowing out, and you already have one going southwest.

    And the northeastern river, where the river splits. Again, this river shouldn't be flowing out because you already have a river flowing out to the southwest, and even if this river was flowing out, it wouldn't flow out in 2 spots.
    If this river is meant to be flowing into the sea from higher ground, chances are the river wouldn't fork, especially so close to the sea.

    Other than the river issues, I really like the style of this map! I for one like the refreshing glowing blue of the ocean, I think it just just a style preference. I also really like the border text and the idea of the dried up Mediterranian is really cool aswell. Cant wait to see this develop!

  9. #9
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Default

    Thank you both for the input on the river system. I'll need to go back and readjust a few things to get those right.

    The part that makes it tricky is that without the mountains and highlands/lowlands defined it's not going to make a whole lot of sense. Since this map is meant to be Europe and the Mediterranean area before the advent of a global flood, I intend on making the landscape drastically different. I'll explain some terrain details I theorized so you've got a better scope of what I'm trying to accomplish.

    The highest mountain range on the map will be the Soaring Peaks (which is a massive circular mountain range surrounding the Soaring Sea). This is the highest point of this fictional world. During the global deluge, the weight of the water above the Soaring Sea causes it to collapse in on a massive network of caves and caverns that exist below it, causing the whole region to drop in elevation by several thousand feet. But before that, the soaring sea is actually about seven thousand feet above sea level, held in by the taller mountain range surrounding it (most peaks are well above 10 thousand feet).

    The Soaring Sea is actually fed supernaturally from another realm (the Plane of Ćther Mist - which is also how the giant canopy of water over the earth is being suspended). The Soaring Sea then feeds the rest of the known world via four outlet rivers. Only the Southwest river flows from the brim of the Sea down a series of waterfalls to the lake and valley below. The other three rivers come from underground sources (where the Sea is leaking out from the bottom - this erosion eventually causes the entire Sea to break free from the mountain range... which occurs when the water canopy falls and the Sea is extremely overfed).

    I hope that explains why the Soaring Sea appears on my map as some ridiculous source of water.

    But your comments were not lost on me. I do believe I'm going to route the Northwestern river above the present day Carpathian Mts. Just to make it look a bit more clear. All of it should look better when my Mountains, Highlands, and Lowlands are visibly defined. Also without knowing the terrain and the mythological/supernatural parts about the story it involves - its definitely looks weird. Especially if it's compared to our present day topography - which will be vastly different than the fictional pre-flood topography I'm envisioning.

    Thank you both very much for the advice and suggestions. I'll be extra careful to make the downward, one-outlet liquid dynamics visibly clear on the map. (I had a feeling I was going to get some questions about the changes I made to the present-day water network; but that's good. Need to flesh these things out.) I appreciate the feedback!
    Last edited by Veluux; 08-24-2013 at 02:02 AM.

  10. #10
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Default

    So...... I decided to scrap the last map (not in style or theory, just a change in design for landmass and waterways). I thought it would be better if I utilized the Great Hungarian Plain as a holding tank for the Soaring Sea - instead of the Black Sea, which is low lying and not completely surrounded by Mountains. The Hungarian Plain, however, pretty much is exactly what I was looking for. I went through and did a redesign on the main bodies of water - including adding a few massive lakes where the Mediterranean Sea has it's lowest points. I then went in and temporarily mapped in the rivers (they won't look that way when it's done). Anyhow, here is what Nah'Veyl v2.0 looks like:

    Attachment 57152

    I also added in a few region names to give a hint at the terrain that is going to come. Let me know if you like the revision!

    EDIT: Just realized I need to resize my distance chart - so ignore that little detail for now.

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •