Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Forest path / Tree experiment

  1. #1
    Community Leader Jaxilon's Avatar
    Join Date
    Nov 2009
    Location
    A beach in Ecuador
    Posts
    5,548

    Default Forest path / Tree experiment

    I just felt like making some trees since I'm always looking for a new ways to do things. Although I may never come back to this, C&C is as always welcomed. Anything I can improve on for next time

    I tossed a grid on just for kicks. There is always room for another quick encounter map, right? (fyi, I may not have the grid size right, like I said I was just goofing around. If you want it changed just let me know and I will take care of it.)
    Attached Images Attached Images
    “When it’s over and you look in the mirror, did you do the best that you were capable of? If so, the score does not matter. But if you find that you did your best you were capable of, you will find it to your liking.” -John Wooden

    * Rivengard * My Finished Maps * My Challenge Maps * My deviantArt

  2. #2
    Community Leader jfrazierjr's Avatar
    Join Date
    Oct 2007
    Location
    Apex, NC USA
    Posts
    3,057

    Default

    That looks most excellent. Those trees, I don't think I had see anything like that before, and they look really good. Did you make those yourself? Perhaps a bit of dodge/burn to give it some illusion of height, mostly on the ones above the darker green, which I assume is grass/moss or something of the like.
    My Finished Maps
    Works in Progress(or abandoned tests)
    My Tutorials:
    Explanation of Layer Masks in GIMP
    How to create ISO Mountains in GIMP/PS using the Smudge tool
    ----------------------------------------------------------
    Unless otherwise stated by me in the post, all work is licensed under a Creative Commons Attribution-Noncommercial 3.0 United States License.

  3. #3
    Community Leader Jaxilon's Avatar
    Join Date
    Nov 2009
    Location
    A beach in Ecuador
    Posts
    5,548

    Default

    They are actually from a mostly round grunge brush. I used 2 shades of green with the "Use Color from Gradient" then I just wriggle them a bit to fill them in so they aren't full of holes. I touch them up flipping between my two colors so the overall image has the right look. (so one side isn't all yellowish and the other green). Use the curves to get the color a little better. I then Duplicate the layer and use a 'find/edge', colorize the result, merge it down (this creates the leaf like texture. I use my eraser to break things up and add some trails where I want (I used a brush called 'inner space' I think which has a lot of holes in it). The green grass/moss flooring was a by product which I liked.

    I will attempt this again and track my steps better. I had created one set I didn't like and blew away a bunch of layers before I created this so sorry if I'm a bit vague on what exactly I used. I promise to do better next time
    “When it’s over and you look in the mirror, did you do the best that you were capable of? If so, the score does not matter. But if you find that you did your best you were capable of, you will find it to your liking.” -John Wooden

    * Rivengard * My Finished Maps * My Challenge Maps * My deviantArt

  4. #4

    Default

    Wow, really nice Jax. Something about it reminds me of my father's old train-set model trees. Maybe because they look slightly 'fuzzy'. I really like the amount of soft detail on these, so they all look like they 'match' but still don't look same-y.

  5. #5
    Community Leader Facebook Connected tilt's Avatar
    Join Date
    May 2010
    Location
    Trelleborg, Sweden
    Posts
    5,787
    Blog Entries
    2

    Default

    looks great - and I agree with RE, they look a bit like model trees for trains .. nice
    As an avid battlemap entusiast I'd like to make a minor suggestion... a few grid marks in between the trees - cause you want to run through those and fight to - gotta get at those pesky archers hiding there, you could just mark the corners, and perhaps some marks to tell us where there is a trunk (but not absolutely necessary)
    regs tilt
    :: My DnD page Encounter Depot free stuff for your game :: My work page Catapult ::
    :: Finished Maps :: Competion maps - The Island of Dr. Rorshach ::
    :: FREE Tiles - Compasses :: Other Taking a commision - Copyright & Creative Commons ::
    Works under CC licence unless mentioned otherwise

  6. #6
    Community Leader Jaxilon's Avatar
    Join Date
    Nov 2009
    Location
    A beach in Ecuador
    Posts
    5,548

    Default

    Thanks for that bit of wisdom Tilt. I will keep this in mind. There is a grid that is under all the trees but the pathways are not really wide enough to show them. So are you wanting I should make them wider or are you saying I should put the grid over the trees? By "mark the corners" do you mean show the intersections of the grid where it is beneath the trees? That might work and I might be able to do that on these without having to redo it.
    “When it’s over and you look in the mirror, did you do the best that you were capable of? If so, the score does not matter. But if you find that you did your best you were capable of, you will find it to your liking.” -John Wooden

    * Rivengard * My Finished Maps * My Challenge Maps * My deviantArt

  7. #7
    Community Leader jfrazierjr's Avatar
    Join Date
    Oct 2007
    Location
    Apex, NC USA
    Posts
    3,057

    Default

    I would not put the grid over the trees. But, perhaps TWO grid layers. The one in the trees section could be masked off to NOT include the full gridlines as they are on the road or other displayed areas. Does that make sense?
    My Finished Maps
    Works in Progress(or abandoned tests)
    My Tutorials:
    Explanation of Layer Masks in GIMP
    How to create ISO Mountains in GIMP/PS using the Smudge tool
    ----------------------------------------------------------
    Unless otherwise stated by me in the post, all work is licensed under a Creative Commons Attribution-Noncommercial 3.0 United States License.

  8. #8
    Community Leader Jaxilon's Avatar
    Join Date
    Nov 2009
    Location
    A beach in Ecuador
    Posts
    5,548

    Default

    I think so. That's what I was thinking along the lines of. Just creating another grid that shows the intersects with a bit going over the edge of the trees. That way you could have an archer in the cover of the tree or you could move through the trees along the edges but not directly through them...I guess another test is in order
    “When it’s over and you look in the mirror, did you do the best that you were capable of? If so, the score does not matter. But if you find that you did your best you were capable of, you will find it to your liking.” -John Wooden

    * Rivengard * My Finished Maps * My Challenge Maps * My deviantArt

  9. #9
    Community Leader Facebook Connected tilt's Avatar
    Join Date
    May 2010
    Location
    Trelleborg, Sweden
    Posts
    5,787
    Blog Entries
    2

    Default

    exactly what I was trying to say ... keep the grid you got, and just a small mark on the intersections above the trees
    regs tilt
    :: My DnD page Encounter Depot free stuff for your game :: My work page Catapult ::
    :: Finished Maps :: Competion maps - The Island of Dr. Rorshach ::
    :: FREE Tiles - Compasses :: Other Taking a commision - Copyright & Creative Commons ::
    Works under CC licence unless mentioned otherwise

  10. #10
    Community Leader Jaxilon's Avatar
    Join Date
    Nov 2009
    Location
    A beach in Ecuador
    Posts
    5,548

    Default

    Ok, here is my interpretation for a secondary grid for the tree areas. Does this work?
    Attached Images Attached Images
    “When it’s over and you look in the mirror, did you do the best that you were capable of? If so, the score does not matter. But if you find that you did your best you were capable of, you will find it to your liking.” -John Wooden

    * Rivengard * My Finished Maps * My Challenge Maps * My deviantArt

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •